📏 Length
➔
0
🟦 Area
➔
0
⚡ Speed
➔
0
⚙️ Torque
➔
0
💪 Force
➔
0
🏎️ Power
➔
0
🎈 Pressure
➔
0
🏛️ Stress
➔
0
⏱️ Time
➔
0
⚖️ Weight
➔
0
🥛 Volume
➔
0
🌡️ Temp
➔
0
📐 Angle
➔
0
🔋 Energy
➔
0
💾 Data
➔
0
⛽ Fuel
➔
0
📈 Finance
0
*Note: This simulation uses simplified state approximations for educational visualization. It does not replace exact IAPWS-IF97 steam tables.
Left Click: Rotate • Right Click: Pan • Scroll: Zoom
Freehand & Geometric Drafting (Supports Touch)
*Simulated based on flat ground & 85% battery efficiency.
| Feature | Lathe (Turning) | Milling |
|---|---|---|
| Primary Motion | Workpiece Rotates | Tool Rotates |
| Feed Motion | Tool moves linearly | Workpiece moves linearly |
| Shape Produced | Cylindrical / Round | Flat / Prismatic / Contoured |
| Cutting Tool | Single Point Insert | Multi-Point (Endmill/Face) |
| Symbol | Type | Name |
|---|---|---|
| ⏤ | Form | Straightness |
| ⏥ | Form | Flatness |
| ○ | Form | Circularity |
| ⌭ | Form | Cylindricity |
| ∥ | Orientation | Parallelism |
| ⟂ | Orientation | Perpendicularity |
| ◎ | Location | Concentricity |
| ISO Grade | Ra (µm) | Ra (µin) | Rz (µm) |
|---|---|---|---|
| N12 | 50 | 2000 | 200 |
| N10 | 12.5 | 500 | 50 |
| N9 | 6.3 | 250 | 25 |
| N8 | 3.2 | 125 | 12.5 |
| N7 | 1.6 | 63 | 6.3 |
| N6 | 0.8 | 32 | 3.2 |
| Code | Description |
|---|---|
| G00 | Rapid Positioning |
| G01 | Linear Interpolation (Cutting) |
| G02 | Circular Interpolation (CW) |
| G03 | Circular Interpolation (CCW) |
| G20 | Units: Inches |
| G21 | Units: Millimeters |
| G28 | Return to Home |
| G90 | Absolute Positioning |
| G91 | Incremental Positioning |
| M03 | Spindle ON (CW) |
| M04 | Spindle ON (CCW) |
| M05 | Spindle OFF |
| M06 | Tool Change |
| M08 | Coolant ON |
| M30 | End Program |
| Material | Density (g/cm³) | Yield (MPa) |
|---|---|---|
| Steel 1018 (Mild) | 7.87 | 370 |
| Steel 1040 (Carbon) | 7.85 | 415 |
| Steel 4140 | 7.85 | 655 |
| Stainless 304 | 8.00 | 215 |
| Aluminum 6061-T6 | 2.70 | 276 |
| Aluminum 7075-T6 | 2.81 | 503 |
| Titanium Gr5 | 4.43 | 880 |
| Brass C360 | 8.50 | 310 |
| ABS Plastic | 1.04 | 40 |
| Size | Pitch | Tap Drill | Hex Key |
|---|---|---|---|
| M2 | 0.4 | 1.6 mm | 1.5 mm |
| M3 | 0.5 | 2.5 mm | 2.5 mm |
| M4 | 0.7 | 3.3 mm | 3.0 mm |
| M5 | 0.8 | 4.2 mm | 4.0 mm |
| M6 | 1.0 | 5.0 mm | 5.0 mm |
| M8 | 1.25 | 6.8 mm | 6.0 mm |
| M10 | 1.5 | 8.5 mm | 8.0 mm |
| M12 | 1.75 | 10.2 mm | 10.0 mm |